
SENT GEO: what it is, whether the SENT GEO app still works and what to use in 2026
A driver is told to “install SENT GEO”, a tracker’s description says “SENTGeo”, and PUESC notices talk about a “SENT-GEO outage”. These are three different things. We explain what SENT GEO is today, how the state SENT GEO app worked and when it ended, what replaced it, what locator numbers look like and how to enter them in an RMPD and a SENT notification.
Key figures
Short answer: what SENT GEO is
SENT GEO (also written SENT-GEO) is no longer an app today: it is the module of the SENT register on PUESC that collects vehicle positions for SENT and RMPD notifications. The state driver app of that name, “Aplikacja Kierowcy SENT GEO”, could be used for SENT only until 30 November 2021; since 1 December 2021 the only app for sending geolocation has been e-TOLL PL. In 2026 the position is sent by the e-TOLL PL app, an OBU on-board unit or a ZSL tracker registered in the SENT service.
SENT GEO today: the register module that receives positions
The SENT Act lists the technical means of monitoring as the notification register with a module collecting and processing geolocation data, the locator, and the external location system (art. 4(1)). PUESC calls that module SENT GEO: its page for OBU and ZSL operators says they send data to the SENT GEO module, part of the SENT register. The RMPD406 form labels it RMPD-GEO.
From each locator the register stores the vehicle’s coordinates, speed, date and time, azimuth, satellite data error and the locator or device number (art. 4(4)(1a)). KAS and ITD inspectors see this data during a check; you see it in the SENT406 and RMPD406 forms and in e-TOLL PL.
RMPD positions travel the same way: per PUESC notices, SENT-GEO outages also hit RMPD406. The duty comes from art. 10a-11 of the SENT Act (via art. 28b(5) of the Road Transport Act), and the PUESC FAQ confirms the same devices, even the same locator, work for both.
The SENT GEO app: its history from 2018 to 2021
The locator entered the SENT Act on 1 October 2018: an amendment (Dz.U. 2018 poz. 1539) defined it as a device running software provided by the Head of KAS, added external location systems and the duty to send geolocation along the whole route (art. 10a-10c). Until the end of 2021 that software for the driver’s phone was the state app “Aplikacja Kierowcy SENT GEO”. Then:
| Date | What happened | Source |
|---|---|---|
| 17.06.2021 | e-TOLL PL is integrated with SENT; SENT GEO (and its test version) stays in the stores until 30.09.2021 | e-TOLL notice, 17.06.2021 |
| 1.10.2021 | For e-TOLL and SENT, only e-TOLL PL remains in Google Play and the App Store | e-TOLL notice, 17.06.2021 |
| 30.11.2021 | The last day an installed SENT GEO could be used for SENT (first announced: 31.10.2021) | PUESC, “Aplikacje mobilne” |
| 1.12.2021 | e-TOLL PL becomes the only app sending geolocation to e-TOLL and SENT; SENT notifications accept only it or devices from the new ZSL services | e-TOLL, 7.12.2021; PUESC |
| 17.12.2021 | Per e-TOLL, devices from the old ZSL services are deregistered and SENT-GEO stops accepting their positions | e-TOLL, 14.12.2021 |
Since 1 November 2024 the same module has also received RMPD positions. In autumn 2026 PUESC reported two SENT-GEO outages, on 12 October (10:00-12:00) and 15 October (10:00-12:39): the SENT406 and RMPD406 forms could show no last position or an old one, while the notification register kept working.
Does the SENT GEO app still work in 2026?
No. According to PUESC, since 1 December 2021 the only app for sending geolocation to SENT has been e-TOLL PL, and it works for RMPD too. So “install SENT GEO” means one of two things:
- e-TOLL PL on the phone - the free app of the Polish Ministry of Finance, which becomes the locator for SENT and RMPD;
- or a GPS tracker whose provider has set up data transfer to SENT GEO - then the driver installs nothing.
An old SENT GEO left on a phone is not a locator for a notification: SENT and RMPD take the e-TOLL PL number or the business number of a device from the new ZSL services.
What to send geolocation with in 2026: e-TOLL PL, OBU or ZSL
| Option | Who gives the number | What the driver does | What to watch |
|---|---|---|---|
| e-TOLL PL on a phone | The app itself, on installation (“Twój identyfikator urządzenia”) | Starts “Przejazd SENT/RMPD” when the carriage in Poland begins and ends it no earlier than its end | Free; needs internet, location on and, on Android, battery optimisation off |
| OBU - on-board unit | The operator that registered the device on PUESC for SENT | Does not switch it off or move it to another vehicle mid-trip | A device registered only for e-TOLL gives no positions in SENT GEO |
| ZSL - fixed tracker | The ZSL operator, after registering the device in the SENT service | Makes sure the tracker has power | The carrier checks that the operator registered it for SENT and that data arrives |
The PUESC FAQ recommends an OBU or ZSL as the main locator and e-TOLL PL as the backup; the register then records both. Each option in detail, with typical mistakes: GPS locator for RMPD and SENT.
Locator numbers: Z, M and what else to know
Per the PUESC data schema (STypes.xsd), a locator number in SENT and RMPD is a letter, two digits, a hyphen, six characters (two letters, two digits, two letters), a hyphen and a check digit - for example Z00-KT45HM-2.
- Z - the business number of an operator’s device, OBU or ZSL.
- M - the number of the e-TOLL PL app on a phone.
- A and U are also allowed: the PUESC FAQ gives “U/Znn-xxnnxx-n” for operators’ devices, while the SENT backup field takes only mobile numbers starting with A, M or U. So don’t guess the device from the letter - copy the number from the app or the operator.
- The middle part of the number has no letters O or I, so “0” and “1” there are always digits.
- The last digit is a check digit, so a single typo gets the number rejected.
A tracker’s serial number or IMEI is not a locator number: you need the business number the operator gets when registering the device on PUESC (PUESC FAQ 07.05).
How to enter the locator in RMPD and SENT
- Get the number. The driver copies “Twój identyfikator urządzenia” in e-TOLL PL and sends it to the dispatcher; for an OBU or ZSL the operator provides it.
- RMPD 100. In the means of transport section - the field “Numer urządzenia/lokalizatora GPS” (required) and, if needed, “Numer zapasowego lokalizatora GPS”. PUESC will not accept the same number in both fields.
- SENT. The carrier enters the locator (and an optional backup) in its part of the notification: with the carrier key for SENT-100 or SENT-200, directly in its own SENT-300. The SENT backup can only be an app number, not a Z number.
- Link the app. In e-TOLL PL the “Powiąż ze zgłoszeniem SENT/RMPD” button opens PUESC, where the notification is linked to the identifier. Without that the SENT/RMPD trip will not start.
- On the road the driver starts “Przejazd SENT/RMPD” when the carriage in Poland begins and taps “Zakończ przejazd” no earlier than its end (art. 10b of the SENT Act).
- Phone or device replaced - amend the notification: RMPD - Aktualizacja (RMPD 101 in our account) or a SENT update with the carrier key.
If a trip needs both RMPD and SENT, one locator is enough: the PUESC FAQ allows the same number in both. More in SENT on the driver’s phone and, on which goods fall under SENT, in SENT 100, 200, 300 in plain words.
“SENTGeo” at GPS providers: what it is
Some GPS tracker and fleet platform descriptions include modules called “SENT GEO”, “SENT-GEO” or “SENTGeo”. Usually this is the provider’s integration: acting as an external location system, it passes tracker positions to the state SENT GEO module. It is not a state app and does not replace e-TOLL PL as a phone backup.
What matters for RMPD and SENT is not the name but two things from the PUESC FAQ: the operator registered the device on PUESC for SENT, not only for e-TOLL, and issued a business number; and the data really reaches SENT GEO. Only the operator manages such devices on PUESC. To check, run RMPD406 or SENT406 with that number once the trip has started.
A GPS tracker connected to the Moisa Logistics account shows your vehicles on the fleet map in the account, but that is viewing only: we change nothing in the tracker, and it does not give you a locator number for RMPD or SENT.
How to check that SENT GEO receives positions
- RMPD406 on PUESC or “Lokalizacja GPS (SENT/RMPD 406)” in e-TOLL PL - for RMPD; step by step in RMPD 406 how to check.
- SENT406 on PUESC - the same for SENT, without logging in: SENT number, vehicle number, locator number.
- Icons in e-TOLL PL. For SENT/RMPD orange means over 10 minutes without a position or transmission update, red means over 60.
- PUESC notices. During outages and emergency procedures PUESC asks for locators to be started and kept on.
After an hour without a signal the driver must stop at the nearest parking area (art. 10c of the SENT Act), and the carrier risks a PLN 10,000 penalty for missing geolocation. What to do when PUESC is down is in PUESC is down.
How we handle it
In the Moisa Logistics account the main and backup locator numbers sit in the vehicle card, and the form flags a wrongly formatted number before filing. Once an RMPD is filed, tracking shows the positions SENT GEO collected on a map and alerts you with the last point when the signal disappears.
- RMPD or SENT full service - 500 UAH per document, self-service in the account - 100 UAH (first 10 days - 0 UAH); RMPD tracking is included.
- Tracking for an RMPD prepared elsewhere - RMPD 406 for 50 UAH.
Order: SENT full service, RMPD full service or RMPD self-service in the account.
Frequently asked questions
Sources
- PUESC - Aplikacje mobilne: e-TOLL PL (dla SENT zastąpiła aplikację SENT-GEO) - od 1 grudnia 2021 r. jedyna aplikacja do przekazywania danych geolokalizacyjnych do systemu SENT; „Aplikacja Kierowcy SENT GEO” na potrzeby SENT tylko do 30 listopada 2021 r.checked 21 November 2026
- e-TOLL - Mobile applications for e-TOLL and SENT (17.06.2021): SENT GEO driver application for SENT until 31.10.2021, from 01.11.2021 e-TOLL PL the only application; the dates were later moved: SENT GEO for SENT until 30.11.2021, e-TOLL PL the only application from 01.12.2021checked 21 November 2026
- e-TOLL - One application for e-TOLL and SENT systems since December 1 (07.12.2021): e-TOLL PL the only application transferring geolocation data to e-TOLL and SENT; in SENT notifications only locators from new ELS services or the e-TOLL PL appchecked 21 November 2026
- e-TOLL - ELS devices used for the needs of the SENT system (14.12.2021): devices of old ELS services deregistered on 17.12.2021, their geolocation data no longer accepted by SENT-GEOchecked 21 November 2026
- Ustawa z dnia 15 czerwca 2018 r. o zmianie ustawy o systemie monitorowania drogowego i kolejowego przewozu towarów, Dz.U. 2018 poz. 1539: lokalizator, numer lokalizatora, numer urządzenia, zewnętrzny system lokalizacji, moduł geolokalizacyjny rejestru, art. 10a-10c; wejście w życie 1.10.2018checked 21 November 2026
- Ustawa o systemie monitorowania drogowego i kolejowego przewozu towarów (SENT), tekst jednolity Dz.U. 2024 poz. 1218: art. 2, 3 ust. 6, 5-11, 13-17, 21-24, 31-32 (dla RMPD - przez art. 28b ust. 5 ustawy o transporcie drogowym)checked 21 November 2026
- Ustawa z dnia 6 września 2001 r. o transporcie drogowym, tekst jednolity Dz.U. 2025 poz. 1490 (art. 28, 28b, 28c, 89a1, załączniki nr 1 i 3)checked 21 November 2026
- PUESC - Obsługa zewnętrznych systemów lokalizacji (ZSL/OBU): operator dostarcza dane lokalizacyjne do modułu SENT GEO wchodzącego w skład rejestru SENT; formularze ZSL100 i ZSL105checked 21 November 2026
- gov.pl/web/kas - Struktura interfejsu SENT GEO: wymogi techniczne przekazywania danych geolokalizacyjnych z zewnętrznych systemów lokalizacji (wersja 11.0 z 05.05.2025)checked 21 November 2026
- PUESC - FAQ SENT, 07. Obsługa zewnętrznych systemów lokalizacji ZSL/OBU (07.05-07.20, aplikacja e-TOLL PL jako lokalizator zapasowy)checked 21 November 2026
- PUESC - FAQ RMPDchecked 21 November 2026
- PUESC - schemat XSD systemu SENT (STypes.xsd): numer referencyjny SENT + 14 cyfr, klucz przewoźnika KD-, numer lokalizatorachecked 21 November 2026
- e-TOLL - Aplikacja mobilna e-TOLL PL: instrukcja korzystania dla przejazdów SENT/RMPD (identyfikator biznesowy, Przejazd SENT/RMPD, Lokalizacja GPS SENT/RMPD 406, status baterii i GPS)checked 21 November 2026
- e-TOLL - Podręcznik użytkownika aplikacji mobilnej e-TOLL PL v. 3.13: języki, identyfikator biznesowy, przejazd SENT/RMPD i łączony, komunikaty w trakcie przejazdu, Lokalizacja GPS (SENT/RMPD 406)checked 21 November 2026
- PUESC - RMPD406 Sprawdzenie ważności zgłoszenia przewozu z ostatnią pozycją GPS [RMPD]: dane wyświetlane, gdy dane geolokalizacyjne z lokalizatora zostały poprawnie przesłane do RMPD-GEOchecked 21 November 2026
- PUESC - Sprawdź dane geolokalizacyjne środka transportu (formularz SENT406, bez logowania)checked 21 November 2026
- PUESC - Utrudnienia w funkcjonowaniu SENT-GEO 12.10.2026 r.: SENT406 i RMPD406 bez ostatniej pozycji; rejestr zgłoszeń SENT i RMPD działa, przewozy można rozpocząć i kontynuowaćchecked 21 November 2026
- PUESC - Awaria SENT-GEO 15.10.2026 r. (10:00-12:39): rejestr zgłoszeń SENT i RMPD działa poprawnie, zgłoszenia rejestrować, lokalizatory uruchomićchecked 21 November 2026
- PUESC - SENT - procedura awaryjna 24.09.2026 r. (21:00-23:00; formularze SENT i RMPD; awaria.sent@mf.gov.pl i awaria.zezwolenia@gitd.gov.pl; lokalizatory uruchomić, OBU/ZSL, urządzeń mobilnych i e-TOLL PL nie wyłączać)checked 21 November 2026
Need documents for a trip?
Create a free account and prepare the document in your account - by yourself or with our team’s hands. Or leave a request: we will call you and tell you what you need for your particular trip.
More news



We are on TikTok
How to prepare documents from your phone, what is changing for carriers and where to save - in short videos.



