Customs documentsT1 / T2 in NCTS fast processing · 24/7Poland documentsPricingGuidesNewsContact
Home›News›Mapon and RMPD: how to connect a Mapon tracker to trip tracking
A truck on a road through fields, seen from above - vehicles with a Mapon tracker show on the “Fleet map”
Photo: Sven Brandsma / Unsplash

Mapon and RMPD: how to connect a Mapon tracker to trip tracking with an API key

Mapon and RMPD are linked through an API key: the Mapon account administrator creates the key and picks the vehicles, and their coordinates appear on the “Fleet map” and in trip tracking in your Moisa Logistics account. The Mapon tracker does not become a locator for RMPD or SENT. Below: four steps in Mapon, what you will see in the account and the usual mistakes.

Logo Moisa LogisticsMoisa Logistics··7 min read

Key figures

4 stepsin Mapon: Settings → API keys → CREATE API KEY → SAVE
5 minhow often tracker data refreshes on the “Fleet map”
10,000 złcarrier fine for missing geolocation in an RMPD

In short: Mapon and RMPD tracking

A Mapon tracker connects to your Moisa Logistics account with an API key. The Mapon account administrator creates the key under Settings → API keys, picks the vehicles Moisa will see and pastes the key into the “Access key” field in our account. We only see those vehicles and their coordinates and change nothing in Mapon. In the account this system is labelled “Mapon and its partners”: if a partner on the Mapon platform services your tracker, the key is created the same way.

The Mapon key does not give you a number for the RMPD. The notification needs a locator: the e-TOLL PL app, an OBU or a ZSL device of an operator registered in e-TOLL.

  • Where Mapon shows up: the “Fleet map” - every vehicle in the key, on a trip or not; an order with an RMPD - the dashed tracker line next to the PUESC line.
  • What it gives you: the account tells a stop from a signal loss and warns you when the truck is moving while PUESC gets no positions.
  • Who connects it: in Mapon, the account administrator creates the key; in the Moisa Logistics account, the company owner connects it.

Mapon and RMPD: tracker or locator

Mapon describes itself on its website as a fleet management platform: GPS tracking, tachographs, fuel, video. For a Polish RMPD something else matters - where PUESC gets the positions from. A locator or device number is mandatory in an RMPD (Art. 28b(3)(12) of the Polish Road Transport Act), and positions from it must reach PUESC along the whole Polish stretch (Art. 28b(5)). The SENT Act accepts a locator - in practice the e-TOLL PL app on the driver’s phone - or an external location system (ZSL) that a ZSL operator fits permanently in the vehicle; there is also the portable OBU. Only the operator registers a device in PUESC - for e-TOLL, for SENT or for both (PUESC FAQ 07.05).

The API key opens Mapon coordinates to our account, not to PUESC. So before the trip, check:

  1. Whether your provider is a ZSL operator - ask them, or find them on the official list of OBU/ZSL operators and devices admitted to e-TOLL at etoll.gov.pl (the “OBU and ELS on-board devices” section, version of 06.11.2026).
  2. Whether the device is registered for SENT specifically: a device registered only for e-TOLL pays the tolls but gives no positions in RMPD 406 (FAQ 07.15). An operator device number starts with Z or U.
  3. What is entered in the RMPD while there is no ZSL number: as the main locator - e-TOLL PL on the driver’s phone.

What the number looks like and how to set up a main and a backup locator is in the article GPS locator for RMPD and SENT. What happens when an RMPD carries a tracker that is not in SENT is in the article car transporters and GPS fines in Poland. Which other systems connect to the account and how a fleet tracker differs from a locator is covered in the overview GPS tracker for RMPD and SENT.

What Mapon shows in your Moisa Logistics account

For RMPD tracking the account takes positions from PUESC, and Mapon data comes in as a second source, so you understand what is happening to the truck:

SituationWhat the account shows
The truck is not on a trip“Fleet map”: “Not on a trip - location from tracker” and the time of the last point
The truck is on a trip with an RMPD“Fleet map”: the order number and the route driven; in the order - the PUESC line and the dashed Mapon tracker line for the order’s time
PUESC is silent, Mapon shows a stop“Stopped · per tracker”: a pause, not a signal loss, so we send no alert; when it moves, we check again
PUESC is silent, Mapon shows movement“Fine risk” and an alert: check the locator or the driver’s app
There is a dashed Mapon line but no PUESC lineThe truck was moving while the PUESC locator was silent - you see on which stretch

Tracker data refreshes every 5 minutes. We are not a government service and only show tracking data from PUESC: when the connection drops, the cause - the locator, the driver’s app or the mobile operator - is found on the spot. The plan of action is in the article RMPD 406: GPS signal lost.

Mapon API key: how to create a key for Moisa Logistics

Only account administrators or users with unlimited permissions can manage API keys in Mapon, and Mapon support does not create a key for the client. Mapon advises a separate key for each third-party platform - so create one just for Moisa.

  1. Sign in to Mapon as the account administrator.
  2. Settings → API keys → CREATE API KEY - the button in the top-right corner of the API keys section.
  3. Select the vehicles Moisa will see - all of them or a limited list, single vehicles or a group - and click SAVE. The new key appears in the API keys section.
  4. Copy the key.

Then, in your Moisa Logistics account:

  1. Profile → the “Integrations” tab → the “GPS trackers” section.
  2. Pick the Mapon tile among the GPS providers, or the system directly - “Mapon and its partners”. The “Step-by-step guide” button shows these same steps.
  3. Paste the key into the “Access key” field and click “Check and connect”.

The “GPS trackers” section (Profile → “Integrations”) is in every company’s account, and the company owner does the connecting.

New vehicles, matching and disconnecting

Vehicles in the key are matched to the fleet by licence plate on their own; the connection card shows “Trackers: N, matched to vehicles: M”. Whatever was not matched, pick in the tracker list under the card - a vehicle from the fleet or “Not from the fleet”.

Add new vehicles to this key in Mapon - otherwise we will not see them. The key is edited in the same API keys section. To disconnect, click “Disconnect”: we delete the access on our side, and the trackers disappear from the fleet map. Cancel the key itself in Mapon, in the API keys section.

Example: Krakovets - Korczowa, three trucks

A carrier has connected Mapon; the key holds the whole fleet except a new tractor unit (the example is made up).

  • A truck without an RMPD waits for loading near Lviv: the “Fleet map” shows “Not on a trip - location from tracker” with the time of the last point.
  • A truck with an RMPD has crossed Krakovets - Korczowa: the order shows the PUESC line and the dashed Mapon line. At a night stop near Rzeszów, PUESC is silent for a while and Mapon shows the truck parked - status “Stopped · per tracker”, no alert.
  • The new truck is not on the map: it was not added to the key. The administrator adds it to the key in Mapon, and it appears with the next refresh.

If PUESC is silent while Mapon sees movement, the account sets “Fine risk” and sends an alert. After more than an hour without a locator the driver must stop at the nearest parking place (Art. 10c of the SENT Act), and the carrier faces 10,000 zł for missing geolocation in the RMPD.

Common mistakes with the Mapon API key

What you seeWhat to check
Mapon shows no API keys section or no CREATE API KEY buttonYou are not signed in as an administrator: only account administrators or users with unlimited permissions manage API keys
“The GPS system returned no vehicles”Whether vehicles were selected in the Mapon key
A new truck does not appear on the mapWhether it was added to this key in Mapon
“The system does not accept this key”Whether the key was copied in full and whether its access was cancelled in the API keys section
The account is already connected to another companyThis Mapon account is already connected to another company in Moisa Logistics - write to support
The tracker is on the map, but RMPD 406 shows no positionsThe tracker is not registered in SENT, or the RMPD carries another number: check the locator number and, if needed, enter e-TOLL PL with an RMPD 101 correction

RMPD tracking at Moisa Logistics: price

  • Trip tracking is included in the RMPD price: full service - 500 UAH per document, self-service in the account - 100 UAH (the first 10 days - 0 UAH).
  • RMPD 406 - 50 UAH for an RMPD made elsewhere: a route map from PUESC data and an alert when GPS disappears.

Order: RMPD full service, RMPD self-service, RMPD 406. How to read the tracking statuses is explained in the article why RMPD 406 and trip tracking.

Frequently asked questions

Sign in as the account administrator: Settings → API keys → CREATE API KEY, select the vehicles and click SAVE. The client creates the key - Mapon support will not do it for you.
Only if the operator has registered the device in PUESC in the SENT service and issued a business number starting with Z or U. The API key for your Moisa Logistics account does not create a locator - confirm the number with your provider or enter the e-TOLL PL app.
Most likely it was not added to the key. Add the vehicle to this key in Mapon - otherwise we will not see it.
Only the vehicles you selected in the key and their coordinates. We change nothing in Mapon; after “Disconnect” we delete the access on our side, and you cancel the key itself in Mapon.
No. RMPD tracking runs on PUESC data and is included in the RMPD price. The Mapon tracker adds a route line and helps tell a stop from a signal loss.
It is included in the RMPD price: 500 UAH full service or 100 UAH self-service in the account (the first 10 days - 0 UAH). For an RMPD made elsewhere - RMPD 406 at 50 UAH.
Moisa Logistics

Need documents for a trip?

Create a free account and prepare the document in your account - by yourself or with our team’s hands. Or leave a request: we will call you and tell you what you need for your particular trip.

Leave a request

Fill in your contact details and we will sort out the rest by phone. We will call you back during working hours.

We only call about your request. No mailing lists.

Leave a requestPricing